NEC TECHNOLOGIES, INC.
T-130B (CD-XT003)
|
Card Type |
Hard drive controller |
|
Hard Drives supported |
Up to 7 SCSI devices |
|
Floppy drives supported |
None |
|
Data Bus |
8-bit ISA |
|
Card Size |
Half-length, full-height |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
50-pin SCSI connector - internal |
J2 |
25-pin SCSI connector - external |
P1 |
|
Drive active LED |
JP4 | ||
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
|
Zero wait state enabled |
JP2 |
Closed | |
|
Zero wait state disabled |
JP2 |
Open | |
|
Boot ROM enabled |
SW1/6 |
Off | |
|
Boot ROM disabled |
SW1/6 |
On | |
|
Factory configured - do not alter |
SW1/7 |
Off | |
|
Factory configured - do not alter |
SW1/8 |
Off | |
|
BOOT ROM ADDRESS SELECTION | |||
|
Setting |
SW1/3 |
SW1/4 |
SW1/5 |
|
CA000h |
Off |
Off |
On |
|
CE000h |
Off |
On |
Off |
|
DA000h |
On |
Off |
Off |
|
DE000h |
On |
Off |
On |
|
Note:If no EPROM chip installed in the boot ROM socket, the above switches should be in the "off" position. | |||
|
I/O ADDRESS SELECTION | |||
|
Setting |
SW1/1 |
SW1/2 | |
|
240h |
On |
On | |
|
250h |
On |
Off | |
|
340h |
Off |
On | |
|
350h |
Off |
Off | |
|
INTERRUPT SELECTION | |||
|
Setting |
JP3/pins 1 & 2 |
JP3/pins 3 & 4 |
JP3/pins 5 & 6 |
|
IRQ3 |
Closed |
Open |
Open |
|
IRQ5 |
Open |
Closed |
Open |
|
IRQ7 |
Open |
Open |
Closed |
|
Disabled |
Pins 2 & 4 closed | ||