NCL AMERICA
NCL 536 VER. 2
|
| |
|
Data bus: |
16-bit, ISA |
|
Size: |
Half-length, full-height card |
|
Hard drive supported: |
Two IDE (AT) interface drives |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
40-pin IDE (AT) Interface connector |
CN2 |
|
4-pin connector - drive active LED |
CN3 |
|
HDD power connector |
JP11 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Diagnostic mode enabled |
E1 |
closed | |
|
Diagnostic mode disabled |
E1 |
open | |
|
IRQ buffer mode disabled |
JP5 |
pins 1 & 2 closed | |
|
IRQ buffer mode enabled |
JP5 |
pins 2 & 3 closed | |
|
IRQ14 enabled |
JP7 |
pins 1 & 2 closed | |
|
IRQ15 enabled |
JP7 |
pins 2 & 3 closed | |
|
Zero wait state enabled |
JP8 |
open | |
|
Zero wait state disabled |
JP8 |
closed | |
|
Address is 1F0h |
JP10 |
open | |
|
Address is 170h |
JP10 |
closed | |