INITIO CORPORATION
INI-9100U
|
Data Bus |
32-bit PCI |
|
Card Size |
Quarter-length, full-height card |
|
Hard Drives supported |
Up to 7 SCSI devices |
|
Floppy drives supported |
None |
|
CONNECTIONS | |||
|
Function |
Location |
Function |
Location |
|
50-pin SCSI connector - internal |
J1 |
4-pin connector - drive active LED |
J3 |
|
50-pin SCSI connector - external |
J2 | ||
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
|
Host adapter is only one in system |
JP1 |
Open | |
|
Host adapter shares SCSI bus with adapter in another computer |
JP1 |
Closed | |
|
Note: Closing jumper JP1 sets active termination so it is always on. The setting is used when the adapter shares the SCSI bus with an adapter in another computer. If that computer can be turned off, closing the jumper will insure that active on-board termination is on all the time, regardless of whether power is applied or not. | |||