INFORTREND TECHNOLOGY, INC.
IFT-3001 (WITH IFT-9021WS/WD/S UPGRADE BOARDS)
|
| |
|
Data bus: |
None |
|
Size: |
3.5 in. form-factor half height |
|
Hard drive supported: |
Up to fourteen Fast SCSI-2 devices with upgrades |
|
Floppy drives supported: |
None |
|
LOWER BOARD CONNECTIONS | |
|
Function |
Location |
|
50-pin SCSI connector channel 0 - external |
J1 |
|
28-pin connector |
CN1 |
|
28-pin connector |
CN2 |
|
UPPER BOARD CONNECTIONS | |
|
Function |
Location |
|
50-pin SCSI connector - external channel 1 |
J2 |
|
9-pin serial port - external |
J3 |
|
50-pin connector |
CN3 |
|
50-pin connector |
CN4 |
|
50-pin connector |
CN5 |
|
50-pin connector |
CN6 |
|
UPGRADE BOARD CONNECTIONS | |
|
Function |
Location |
|
68-pin SCSI connector - external channel 2 |
J4 |
|
9-pin fail-over port - external |
J5 |
|
28-pin connector |
CN7 |
|
28-pin connector |
CN8 |
|
Note: 68-pin connector is on upgrade models FT-9021WS (Wide SCSI Single-Ended) or IFT=9021WD (Wide SCSI Differential). A 50-pin connector is on model IFT-9021S (8-bit Single-Ended) . | |
|
DRAM CONFIGURATIONS | |
|
Size |
Bank 0 |
|
2MB |
(1) 512KB x 36 |
|
4MB |
(1) 1M x 36 |
|
8MB |
(1) 2M x 36 |
|
16MB |
(1) 4M x 36 |
|
32MB |
(1) 8M x 36 |
|
Note: Minimum of 2 MB DRAM must be installed with parity function. Minimum of 4 MB DRAM suggested for RAID-3 and RAID-5 configurations. | |