INFORTREND TECHNOLOGY, INC.
IFT-2000A
|
| |
|
Data bus: |
32-bit PCI |
|
Size: |
Three-quarter length, full-height card |
|
Hard drive supported: |
Up to seven Fast SCSI-2 devices |
|
Floppy drives supported: |
None |
|
CONNECTIONS | |
|
Function |
Location |
|
4-pin connector - drive active LED |
JP2 |
|
50-pin SCSI connector - internal channel 0 |
JP4 |
|
50-pin SCSI connector - external channel 0 |
JP17 |
|
9-pin serial port - external |
JP20 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Factory configured - do not alter |
JP1 |
pins 1 & 2 closed | |
|
Factory configured - do not alter |
JP10 |
open | |
|
Factory configured - do not alter |
JP11 |
open | |
|
Factory configured - do not alter |
JP15 |
open | |
|
ONBOARD CPU SELECTION | ||
|
CPU |
JP9 |
JP18 |
|
486SX-25 |
pins 1 & 2 closed |
pins 2 & 3 closed |
|
486DX-25 |
pins 1 & 2 closed |
pins 1 & 2, 3 & 4 closed |
|
486SX-33 |
pins 2 & 3 closed |
pins 2 & 3 closed |
|
486DX-33 |
pins 2 & 3 closed |
pins 1 & 2, 3 & 4 closed |
|
DRAM CONFIGURATIONS | |
|
Size |
Bank 0 |
|
2 MBytes |
(1) 512K x 36 |
|
4 MBytes |
(1) 1M x 36 |
|
8 MBytes |
(1) 2M x 36 |
|
16 MBytes |
(1) 4M x 36 |
|
32 MBytes |
(1) 8M x 36 |
|
Note: Minimum of 2 MBytes DRAM must be installed with/without parity function. Minimum of 4 MBytes DRAM suggested for RAID-3 and RAID-5 configurations. | |
|
MISCELLANEOUS NOTES |
|
Pin 1 for jumpers JP1, JP9, JP18 are designated for diagram purposes only. |