LONGSHINE MICROSYSTEM, INC.
LCS-6620TX REV. 2
|
| |
|
Data bus: |
16-bit, ISA |
|
Size: |
Full-length, full-height card |
|
Hard drive supported: |
Two ST506/412 (MFM) drives |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
4-pin connector - drive active LED |
CN1 |
|
20-pin data cable connector - drive 0 |
CN2 |
|
20-pin data cable connector - drive 1 |
CN3 |
|
34-pin control cable connector - hard drive |
CN4 |
|
34-pin control cable connector - floppy drive |
CN5 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Factory configured setting - do not alter |
JP1 |
N/A | |
|
Factory configured setting - do not alter |
JP2 |
N/A | |
|
Hard disk address - (1F0-1F7h) primary |
JP3 |
open | |
|
Hard disk address - (170-177h) secondary |
JP3 |
closed | |
|
BIOS all others |
JP5 |
closed | |
|
BIOS DTK |
JP5 |
open | |
|
Card ground not tied to system case |
JP7 |
open | |
|
Card ground tied to system case |
JP7 |
closed | |
|
Factory configured setting |
JP8 |
pins 2 & 3 closed | |
|
Fuji 3.5" hard disk drive |
JP8 |
pins 1 & 2 closed | |
|
FLOPPY DRIVE ADDRESS SELECT | |||
|
Setting |
JP4 |
JP6 | |
|
Primary (3F0-3F7h) |
open |
pins 2 & 3 closed | |
|
Secondary (370-377h) |
closed |
pins 1 & 2 closed | |