LEADINGSPECT CORPORATION
PCI-SPECT
|
| |
|
Data bus: |
PCI-bus |
|
Size: |
Half-length, three quarter-height card |
|
Hard drive supported: |
Four IDE (AT) interface drives |
|
Floppy drives supported: |
None |
|
CONNECTIONS | |
|
Function |
Location |
|
40-pin IDE (AT) Interface connector - primary |
JP2 |
|
40-pin IDE (AT) Interface connector - secondary |
JP3 |
|
Drive active LED connector |
JP23 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Factory configured - do not alter |
JP6 |
N/A | |
|
Factory configured - do not alter |
JP7 |
open | |
|
BIOS ADDRESS | |||
|
Address |
JP4 |
JP5 | |
|
D800h |
pins 2 & 3 closed |
pins 2 & 3 closed | |
|
C800h |
pins 2 & 3 closed |
pins 1 & 2 closed | |
|
D000h |
pins 1 & 2 closed |
pins 2 & 3 closed | |
|
Disabled (no BIOS installed) |
pins 1 & 2 closed |
pins 1 & 2 closed | |
|
PRIMARY IDE PORT INTERRUPT SELECT | ||||
|
IRQ |
JP16 |
JP17 |
JP18 |
JP19 |
|
Interrupt A |
closed |
open |
open |
open |
|
Interrupt B |
open |
closed |
open |
open |
|
Interrupt C |
open |
open |
closed |
open |
|
Interrupt D |
open |
open |
open |
closed |
|
Note:The interrupt setting for the primary port must be the same as the setting for the secondary port. | ||||
|
SECONDARY IDE PORT INTERRUPT SELECT | ||||
|
IRQ |
JP15 |
JP20 |
JP21 |
JP22 |
|
Interrupt A |
closed |
open |
open |
open |
|
Interrupt B |
open |
closed |
open |
open |
|
Interrupt C |
open |
open |
closed |
open |
|
Interrupt D |
open |
open |
open |
closed |
|
Note:The interrupt setting for the secondary port must be the same as the setting for the primary port. | ||||