LONGSHINE MICROSYSTEM, INC.
LCS-6941
|
| |
|
Data bus: |
32-bit VESA |
|
Size: |
Full-length, full-height card |
|
Hard drive supported: |
Four IDE (AT) Interface drives |
|
Floppy drives supported: |
Four 360KB, 720KB, 1.2MB, 1.44MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
40-pin IDE(AT) interface connector |
J1 |
|
40-pin IDE(AT) interface connector |
J2 |
|
34-pin data cable connector - floppy drive |
J3 |
|
34-pin data cable connector - floppy drive |
J4 |
|
4-pin connector - drive active LED |
JP1 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Factory configured - do not alter |
JP2 |
open | |
|
Floppy drive interface enabled |
JP3 |
pins 1 & 2 closed | |
|
Floppy drive interface disabled |
JP3 |
pins 2 & 3 closed | |
|
DRAM CONFIGURATION | ||
|
Size |
Bank 0 |
Bank 1 |
|
512KB |
(2)256K x 9 |
NONE |
|
1MB |
(2)256K x 9 |
(2)256K x 9 |
|
2MB |
(2)1M x 9 |
NONE |
|
4MB |
(2)1M x 9 |
(2)1M x 9 |
|
8MB |
(2)4M x 9 |
NONE |
|
10MB |
(2)4M x 9 |
(2)1M x 9 |
|
16MB |
(2)4M x 9 |
(2)4M x 9 |