LCS-6611/W
|
| |
|
Data bus: |
16-bit, ISA |
|
Size: |
Full-length, full-height card |
|
Hard drive supported: |
Two MFM ST506/412 drives |
|
Floppy drives supported: |
None |
|
CONNECTIONS | |
|
Function |
Location |
|
4-pin connector - drive active LED |
J1 |
|
20-pin data cable connector - drive 1 |
J2 |
|
20-pin data cable connector - drive 0 |
J3 |
|
34-pin control cable connector - hard drive |
J4 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Hard drive primary address select |
J5 |
pins 1 & 2 closed | |
|
Hard drive alternate address select |
J5 |
pins 2 & 3 closed | |
|
Hard drive LED in latch mode |
J7/A |
open | |
|
Hard drive LED in non-latch mode |
J7/A |
closed | |
|
Factory configured - do not alter |
J7/B |
open | |
|
Hard drive incompatible with WD1003-WAH |
J7/C |
open | |
|
Hard drive compatible with WD1003-WAH |
J7/C |
closed | |
|
Bracket and ground are unconnected |
J8 |
open | |
|
Bracket and ground are connected |
J8 |
closed | |