LONGSHINE MICROSYSTEM, INC.
LCS-6641
|
| |
|
Data bus: |
16-bit, ISA |
|
Size: |
Full-length, full-height card |
|
Hard drive supported: |
Four IDE (AT) Interface drives |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
40-pin IDE(AT) Interface connector IDE-1 |
CN1 |
|
40-pin IDE(AT) Interface connector IDE-0 |
CN2 |
|
34-pin control cable connector - floppy drive |
CN3 |
|
4-pin connector - Drive active LED |
JP1 |
|
BIOS ADDRESS | ||||
|
Address |
JP2/jumper 1 |
JP2/jumper 2 |
JP2/jumper 3 | |
|
DC000h |
closed |
closed |
closed | |
|
DC000h |
open |
closed |
closed | |
|
D8OO0h |
closed |
open |
closed | |
|
D4000h |
open |
open |
closed | |
|
D0000h |
closed |
closed |
open | |
|
CC000h |
open |
closed |
open | |
|
C8000h |
closed |
open |
open | |
|
Disabled |
open |
open |
open | |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Floppy drive enabled |
JP2/jumper 4 |
closed | |
|
Floppy drive disabled |
JP2/jumper 4 |
open | |
|
Hard drive port address is 1F0-1F7h |
JP2/jumper 5 |
closed | |
|
Hard drive port address is 170-177h |
JP2/jumper 5 |
open | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
JP2/jumper 6 is factory configured in the closed position - do not alter. |