LONGSHINE MICROSYSTEM, INC.
LCS-6624, LCS-6624G(REV. 1)
Data bus: 16-bit, ISA
Size: half-length, full-height card
Hard drives supported: Two IDE drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB
Special Features: Two serial, one parallel
LCS-6624-G: Game port
|
CONNECTIONS | |
|
Function |
Location |
|
34-pin data cable connector-floppy drive |
J1 |
|
40-pin AT Interface (IDE) connector-internal |
J2 |
|
16 pin game port-internal (LCS-6624-G) |
J3 |
|
10-pin serial port 2-internal |
J4 |
|
DB-9 male connector-serial port 1 |
J5 |
|
DB-25 female connector-parallel port |
J6 |
|
4-pin connector-drive active LED |
JP1 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Factory configured - do not alter |
JP2/jumper 4 |
closed | |
|
Factory configured - do not alter |
JP3/jumper 3 |
closed | |
|
Floppy drive enabled |
JP4 |
open | |
|
Floppy drive disabled |
JP4 |
closed | |
|
Hard drive enabled |
JP4A |
open | |
|
Hard drive disabled |
JP4A |
closed | |
|
Parallel port set to LPT2 on IRQ7 |
JP5 & JP5A |
pins 1 & 2 closed | |
|
Parallel port set to LPT3 on IRQ5 |
JP5 & JP5A |
pins 2 & 3 closed | |
|
LCS-6624 not grounded to host |
JP6 |
open | |
|
LCS-6624 grounded to host |
JP6 |
closed | |
|
SERIAL PORT 1 (J5) CONFIGURATION | ||||
|
Port 2 |
JP3/1 |
JP2/2 |
JP2/3 | |
|
Serial port 1 set to COM1 (3F8H-3FFh) |
closed |
open |
closed | |
|
Serial port 1 set to COM3 (3E8H-3EFh)) |
open |
closed |
closed | |
|
SERIAL PORT 2 (J4) CONFIGURATION | ||||
|
Port 2 |
JP2/1 |
JP2/2 |
JP2/3 | |
|
Serial port 2 set to COM2 (2F8H-2FFh) |
closed |
open |
closed | |
|
Serial port 2 set to COM4 (2E8H-2EFh) |
open |
closed |
closed | |