JPN CORPORATION
CA8391, CA8392, CA8392F
|
Q3 /92 |
Data bus: 16-bit, ISA
Size: Half-length, full-height card
Hard drives supported: Two IDE (AT) Interface drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB
|
CONNECTIONS | |
|
Function |
Location |
|
34-pin control cable-floppy drive |
JP1 |
|
40-pin control cable-hard drive |
JP2 |
|
2-pin connector-drive active LED |
JP4 |
|
9-pin serial port (COM2/4) |
JP7 |
|
9-pin serial port (COM1/3) |
JP8 |
|
15-pin game port-external |
P1 |
|
34-pin parallel port-external |
P2 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Serial Port 1 (CN7) is set to COM1 |
JP3-1 |
pins 1 & 2 closed | |
|
Serial Port 1 (CN7) is set to COM3 |
JP3-1 |
pins 2 & 3 closed | |
|
Serial Port 1 (CN7) is enabled |
JP3-2 |
pins 1 & 2 closed | |
|
Serial Port 1 (CN7) is disabled |
JP3-2 |
pins 2 & 3 closed | |
|
Serial Port 2 (CN8) is set to COM2 |
JP3-3 |
pins 1 & 2 closed | |
|
Serial Port 2 (CN8) is set to COM4 |
JP3-3 |
pins 2 & 3 closed | |
|
Serial Port 2 (CN8) is enabled |
JP3-4 |
pins 1 & 2 closed | |
|
Serial Port 2 (CN8) is disabled |
JP3-4 |
pins 2 & 3 closed | |
|
Parallel Port (CN2) is set to LPT1 |
JP3-5 |
pins 1 & 2 closed | |
|
Parallel Port (CN2) is set to LPT2 |
JP3-5 |
pins 2 & 3 closed | |
|
Parallel Port (CN2) is enabled |
JP3-6 |
pins 1 & 2 closed | |
|
Parallel Port (CN2) is disabled |
JP3-6 |
pins 2 & 3 closed | |
|
Game Port (CN10) is enabled |
JP3-7 |
pins 1 & 2 closed | |
|
Game Port (CN10) is disabled |
JP3-7 |
pins 2 & 3 closed | |
|
Floppy drive enabled |
JP3-8 |
pins 1 & 2 closed | |
|
Floppy drive disabled |
JP3-8 |
pins 2 & 3 closed | |
|
Hard drive enabled |
JP5 |
pins 1 & 2 closed | |
|
Hard drive disabled |
JP5 |
pins 2 & 3 closed | |
|
Parallel Port (CN12) is set to IRQ7 (LPT1) |
JP9 |
pins 2 & 3 closed | |
|
Parallel Port (CN12) is set to IRQ5 (LPT2) |
JP9 |
pins 1 & 2 closed | |
|
SERIAL PORT INTERRUPT REQUEST | ||||||
|
IRQ |
JP6/jumper 1 |
JP6/jumper 2 |
JP6/jumper 3 |
JP6/jumper 4 | ||
|
IRQ2 |
closed |
open |
open |
open | ||
|
IRQ3 (CN7 default) |
open |
closed |
open |
open | ||
|
IRQ4 (CN8 default) |
open |
open |
closed |
open | ||
|
IRQ5 |
open |
open |
open |
closed | ||
|
Notes:Select only one unique IRQ for each COM port. Close pins 1-2 for CN7 (COM1/3), and pins 2-3 for CN8 (COM2/4). | ||||||