GIGA-BYTE TECHNOLOGY CO., LTD.
GA-108
| |
Data bus: |
32-bit PCI |
Size: |
Half-length, full-height card |
Hard drive supported: |
Four IDE(AT) drives |
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
CONNECTIONS | |
Function |
Location |
40-pin primary IDE(AT) connector |
CN1 |
40-pin secondary IDE(AT) connector |
CN2 |
34-pin cable connector - floppy drive |
CN3 |
9-pin serial port 1 - external |
CN4 |
10-pin serial port 2 - internal |
CN5 |
25-pin parallel port - external |
CN6 |
2-pin connector - drive active LED |
JP13 |
USER CONFIGURABLE SETTINGS | |||
Function |
Location |
Setting | |
Serial port 2 is COM2 |
JP1/pins 1 & 2 |
closed | |
Serial port 2 is COM4 |
JP1/pins 2 & 3 |
closed | |
Serial port 2 enabled |
JP2/pins 1 & 2 |
closed | |
Serial port 2 disabled |
JP2/pins 2 & 3 |
closed | |
Floppy drive interface enabled |
JP4/pins 1 & 2 |
closed | |
Floppy drive interface disabled |
JP4/pins 2 & 3 |
closed | |
Parallel port is LPT2 |
JP5/pins 1 & 2 |
closed | |
Parallel port is LPT3 |
JP5/pins 2 & 3 |
closed | |
Parallel port enabled |
JP6/pins 1 & 2 |
closed | |
Parallel port disabled |
JP6/pins 2 & 3 |
closed | |
Serial port 1 is COM1 |
JP8/pins 1 & 2 |
closed | |
Serial port 1 is COM3 |
JP8/pins 2 & 3 |
closed | |
Serial port 1 enabled |
JP9/pins 1 & 2 |
closed | |
Serial port 1 disabled |
JP9/pins 2 & 3 |
closed | |
IDE(AT) interface enabled |
JP12 |
open | |
IDE(AT) interface disabled |
JP12 |
closed |
PCI INTERRUPT SELECTION FOR PRIMARY IDE | |||||
INT |
JP14 pins 2 & 3 |
JP15 pins 2 & 3 |
JP16 pins 2 & 3 |
JP17 pins 2 & 3 | |
D |
open |
open |
open |
closed | |
A |
closed |
open |
open |
open | |
B |
open |
closed |
open |
open | |
C |
open |
open |
closed |
open |
PCI INTERRUPT SELECTION FOR SECONDARY IDE | |||||
INT |
JP14 pins 1 & 2 |
JP15 pins 1 & 2 |
JP16 pins 1 & 2 |
JP17 pins 1 & 2 | |
C |
open |
open |
closed |
open | |
A |
closed |
open |
open |
open | |
B |
open |
closed |
open |
open | |
D |
open |
open |
open |
closed |