GSI, INC.
MODEL 4C INTELLIGENT IDEA
|
| |
|
Data bus: |
16-bit, ISA |
|
Size: |
Half-length, full-height card |
|
Hard drive supported: |
Eight IDE (AT) Interface drives |
|
Floppy drives supported: |
None |
|
CONNECTIONS | |
|
Function |
Location |
|
40-pin IDE(AT) Interface connector IDE-1 |
J1 |
|
40-pin IDE(AT) Interface connector IDE-2 |
J2 |
|
40-pin IDE(AT) Interface connector IDE-3 |
J3 |
|
40-pin IDE(AT) Interface connector IDE-4 |
J4 |
|
5-pin connector - DC power |
J5 |
|
4-pin connector - drive active LED - IDE-1-IDE-4 |
J9 |
|
2-pin connector - drive active LED - IDE-1 |
J11/jumper 1 |
|
2-pin connector - drive active LED - IDE-2 |
J11/jumper 2 |
|
2-pin connector - drive active LED - IDE-3 |
J11/jumper 3 |
|
2-pin connector - drive active LED - IDE-4 |
J11/jumper 4 |
|
2-pin connector - drive active LED - IDE-1-IDE-4 |
J11/jumper 5 |
|
HARD DRIVE IDE-4 INTERRUPT REQUEST | |||
|
IRQ |
J6/jumper 1 |
J6/jumper 2 | |
|
9 |
closed |
open | |
|
10 |
open |
closed | |
|
Disabled |
open |
open | |
|
HARD DRIVE IDE-3 INTERRUPT REQUEST | |||
|
IRQ |
J6/jumper 3 |
J6/jumper 4 | |
|
11 |
closed |
open | |
|
12 |
open |
closed | |
|
Disabled |
open |
open | |
|
HARD DRIVE IDE-2 INTERRUPT REQUEST | |||
|
IRQ |
J6/jumper 5 |
J6/jumper 6 | |
|
10 |
closed |
open | |
|
15 |
open |
closed | |
|
Disabled |
open |
open | |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Interrupt Request IRQ14 for IDE-1 enabled |
J6/jumper 7 |
closed | |
|
Interrupt Request IRQ14 for IDE-1 disabled |
J6/jumper 7 |
open | |
|
IDE-3 DMA Acknowledge DACK5 enabled |
J7/jumper 1 |
closed | |
|
IDE-3 DMA Acknowledge DACK5 disabled |
J7/jumper 1 |
open | |
|
IDE-3 DMA Request is DREQ5 enabled |
J7/jumper 2 |
closed | |
|
IDE-3 DMA Request is DREQ5 disabled |
J7/jumper 2 |
open | |
|
IDE-2 DMA Acknowledge DACK6 enabled |
J7/jumper 3 |
closed | |
|
IDE-2 DMA Acknowledge DACK6 disabled |
J7/jumper 3 |
open | |
|
IDE-2 DMA Request is DREQ6 enabled |
J7/jumper 4 |
closed | |
|
IDE-2 DMA Request is DREQ6 disabled |
J7/jumper 4 |
open | |
|
IDE-1 DMA Acknowledge DACK7 enabled |
J7/jumper 5 |
closed | |
|
IDE-1 DMA Acknowledge DACK7 disabled |
J7/jumper 5 |
open | |
|
IDE-1 DMA Request is DREQ7 enabled |
J7/jumper 6 |
closed | |
|
IDE-1 DMA Request is DREQ7 disabled |
J7/jumper 6 |
open | |
|
Hard drive IDE-1 enabled |
J8/jumper 1 |
closed | |
|
Hard drive IDE-1 disabled |
J8/jumper 1 |
open | |
|
Hard drive IDE-2 enabled |
J8/jumper 2 |
closed | |
|
Hard drive IDE-2 disabled |
J8/jumper 2 |
open | |
|
Hard drive IDE-3 enabled |
J8/jumper 3 |
closed | |
|
Hard drive IDE-3 disabled |
J8/jumper 3 |
open | |
|
Hard drive IDE-4 enabled |
J8/jumper 4 |
closed | |
|
Hard drive IDE-4 disabled |
J8/jumper 4 |
open | |
|
BIOS ADDRESS - J10 | |||
|
Address |
J10/jumper 1 |
J10/jumper 2 | |
|
CC00-CDFFh |
closed |
closed | |
|
D400-D5FFh |
open |
closed | |
|
DC00-DDFFh |
closed |
open | |
|
E000-E1FFh |
open |
open | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
IDE-4 has no DMA capability. For any disabled IDE channels, disable corresponding Interrupt Request and DMA configuration. |