GSI, INC.
MODEL 18 INTELLIGENT IDEA
|
| |
|
Data bus: |
16-bit, ISA |
|
Size: |
Half-length, half-height card |
|
Hard drive supported: |
Two IDE (AT) Interface drives |
|
Floppy drives supported: |
None |
|
CONNECTIONS | |
|
Function |
Location |
|
5-pin connector - DC power |
J5 |
|
40-pin IDE(AT) Interface connector |
J6 |
|
4-pin connector - Drive active LED |
J8 |
|
BIOS ADDRESS | |||
|
Settings for Model 18 with Part # 1533-18-03-1 or earlier | |||
|
Address |
J4/jumper 1 |
J4/jumper 2 | |
|
C800-C9FFh |
pins 1 & 2 closed |
pins 1 & 2 closed | |
|
D800-D9FFh |
pins 2 & 3 closed |
pins 1 & 2 closed | |
|
DC00-DDFFh |
pins 2 & 3 closed |
pins 2 & 3 closed | |
|
E000-E1FFh |
pins 1 & 2 closed |
pins 2 & 3 closed | |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
Hard drive port address is 1F0-1F7h (secondary) |
JP4/jumper 2 |
pins 1 & 2 closed | |
|
Hard drive port address is 1F0-1F7h (primary) |
JP4/jumper 2 |
pins 2 & 3 closed | |
|
BIOS ADDRESS | |||
|
Settings for Model 18 with Part # 1533-18-04-7 or later | |||
|
Address |
J4/jumper 3 |
J4/jumper 4 | |
|
C800-C9FFh |
pins 1 & 2 closed |
pins 1 & 2 closed | |
|
D000-D1FFh |
pins 1 & 2 closed |
pins 2 & 3 closed | |
|
D800-D9FFh |
pins 2 & 3 closed |
pins 1 & 2 closed | |
|
E000-E1FFh |
pins 2 & 3 closed |
pins 2 & 3 closed | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
Model 18 with Part # 1533-18-03-1 or earlier does not support hard drive port address 1F0-1F7h. J4/jumper 3 and J4/jumper 4 are not used on Model 18 with Part # 1533-18-03-1 or earlier. J4/jumper 1 is not used on Model 18 with Part # 1533-18-04-7 or later. |