DATA TECHNOLOGY CORPORATION
DTC2277 (TEKRAM VER. 1)
|
Chipset |
Tekram |
|
Maximum Onboard Memory |
Unidentified |
|
Data Bus |
32-bit VESA local bus |
|
Card Size |
Full height, full length |
|
Hard Drives Supported |
Four IDE-AT devices |
|
Floppy Drives Supported |
Unidentified |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
4-pin drive active LED |
JP1 |
40-pin secondary IDE(AT) connector |
CN2 |
|
4-pin connector to speaker |
JP2 |
34-pin cable connector - floppy drive |
CN3 |
|
40-pin primary IDE(AT) connector |
CN1 | ||
|
USER CONFIGURABLE SETTINGS | |||
|
Setting |
Label |
Position | |
|
Primary IDE channel noise filter mode 1 enabled |
JDR0 |
Open | |
|
Primary IDE channel noise filter mode 2 enabled |
JDR0 |
Closed | |
|
Secondary IDE channel noise filter mode 1 enabled |
JDR1 |
Open | |
|
Secondary IDE channel noise filter mode 2 enabled |
JDR1 |
Closed | |
|
Factory configured - do not alter |
JP3 |
Unidentified | |
|
Factory configured - do not alter |
RP1 |
Unidentified | |
|
Factory configured - do not alter |
RP2 |
Unidentified | |
|
Factory configured - do not alter |
RP3 |
Unidentified | |
|
Factory configured - do not alter |
RP4 |
Unidentified | |
|
Factory configured - do not alter |
RP5 |
Unidentified | |
|
Factory configured - do not alter |
RP6 |
Unidentified | |
|
Factory configured - do not alter |
RP7 |
Unidentified | |
|
Note:The exact implementation of the noise filter modes are unidentified. However, mode 1 is compatible with most hard drives. | |||
|
DRAM CONFIGURATION |
|
The configuration of the memory is unidentified. |