DATA TECHNOLOGY CORPORATION
DTC2183 (400511-89B)
|
Data Bus |
16-bit ISA |
|
Card Size |
Half-height, half-length card |
|
Hard Drives supported |
Two IDE (AT) drives |
|
Floppy drives supported |
None |
|
CONNECTIONS | |||
|
Function |
Location |
Function |
Location |
|
Right channel audio out |
J1 |
40-pin IDE(AT) interface connector |
J4 |
|
Left channel audio out |
J2 |
4-pin drive active LED |
J6 |
|
CD-ROM audio in |
J3 | ||
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
|
IDE(AT) interface secondary address is 170h-177h |
W1 |
Closed | |
|
IDE(AT) interface primary address is 1F0h-1F7h |
W1 |
Open | |
|
Hard drive IRQ15 select |
W2 |
Pins 2 & 3 closed | |
|
Hard drive IRQ14 select |
W2 |
Pins 1 & 2 closed | |
|
Hard drive secondary IRQ11 select |
W5 |
Pins 2 & 3 closed | |
|
Hard drive secondary IRQ12 select |
W5 |
Pins 1 & 2 closed | |
|
Note: Jumper W5 is effective only when jumper W1 is closed (secondary address is 170h-177h) | |||
|
MISCELLANEOUS TECHNICAL NOTES |
|
The DTC 2183 (Rev. B) can coexist with ST506/412(MFM), ST506/412(RLL), ESDI, SCSI and IDE controllers. Also supports ATAPI IDE CD-ROM drives. |