DATA TECHNOLOGY CORPORATION
DTC2290 (400395-89A2)
|
| |
|
Data bus: |
32-bit, EISA |
|
Size: |
Three-quarter, full-height card |
|
Hard drive supported: |
Four IDE (AT) interface drives |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
34-pin control cable connector - floppy drive |
J1 |
|
40-pin IDE (AT) interface connector - port 1 |
J2 |
|
40-pin IDE (AT) interface connector - port 2 |
J3 |
|
4-pin connector - drive active LED |
J4 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
|
AT-type floppy drive cable selected |
W4 |
open | |
|
IBM-type floppy drive cable selected |
W4 |
closed | |
|
Drive A: 2.88MB floppy drive support disabled (DTC2290 only) |
W9 |
open | |
|
Drive A: 2.88MB floppy drive support enabled (DTC2290 only) |
W9 |
closed | |
|
DriveB: 2.88MB floppy drive support disabled (DTC2290 only) |
W10 |
open | |
|
Drive B: 2.88MB floppy drive support enabled (DTC2290 only) |
W10 |
closed | |
|
Factory configured - do not alter |
W12 |
N/A | |
|
Factory configured - do not alter |
W13 |
N/A | |
|
Factory configured - do not alter |
W14 |
N/A | |
|
Factory configured - do not alter |
W15 |
N/A | |
|
BIOS ADDRESS | ||||
|
Address |
W1 |
W2 |
W3 | |
|
C800h |
open |
open |
closed | |
|
D000h |
open |
closed |
closed | |
|
D400h |
closed |
closed |
closed | |
|
D800h |
closed |
open |
closed | |
|
Disabled |
N/A |
N/A |
open | |
|
PORT 1 HARD DRIVE 64-HEAD-MAPPING | |||
|
Setting |
W5 |
W6 | |
|
Disabled |
open |
open | |
|
Drive 0 is 64-head mapped |
closed |
N/A | |
|
Drive 0 is not 64-head mapped |
open |
N/A | |
|
Drive 1 is 64-head mapped |
N/A |
closed | |
|
Drive 0 is not 64-head mapped |
N/A |
open | |
|
PORT 2 HARD DRIVE 64-HEAD-MAPPING | |||
|
Setting |
W7 |
W8 | |
|
Disabled |
open |
open | |
|
Drive 0 is 64-head mapped |
closed |
N/A | |
|
Drive 0 is not 64-head mapped |
open |
N/A | |
|
Drive 1 is 64-head mapped |
N/A |
closed | |
|
Drive 0 is not 64-head mapped |
N/A |
open | |