ARTOP ELECTRONIC CORPORATION
AEC6710F
|
Card Type |
Hard drive controller card |
|
Hard Drives supported |
Up to 7 SCSI-2 Fast devices |
|
Floppy drives supported |
None |
|
Data Bus |
32-bit PCI |
|
Card Size |
Full-height, quarter-length card |
|
CONNECTIONS | |||
|
Function |
Location |
Function |
Location |
|
50-pin SCSI connector - external |
CN1 |
4-pin connector - drive active LED |
JP3 |
|
50-pin SCSI connector - internal |
CN2 | ||
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
|
Termination power supply |
JP2 |
Unidentified | |
|
Factory configured - do not alter |
JP5 |
N/A | |
|
Flash ROM normal mode |
JP6 |
Pins 1 & 2 closed | |
|
Flash ROM emergency mode |
JP6 |
Pins 2 & 3 closed | |
|
Note: Jumper JP6 position 2 & 3 is for emergency use only. When the system has written to the Flash ROM more than 10, 000 times, an error message is posted that requests jumper JP6 be moved to pins 2 & 3. The flash ROM should then be replaced as soon as possible so normal mode can be resumed. | |||