ATTO TECHNOLOGY, INC.
EXPRESSPCI-PSCd
|
Card Type |
Hard drive controller card |
|
Processor |
RISC |
|
Hard Drives supported |
Up to 15 Ultra/Wide SCSI Differential devices |
|
Floppy drives supported |
None |
|
Data Bus |
32-bit PCI |
|
Card Size |
Half-length, full-height card |
|
RAID levels supported |
0 |
|
CONNECTIONS | |||
|
Function |
Location |
Function |
Location |
|
50-pin SCSI connector - internal |
J1 |
4-pin connector - drive active LED |
J3 |
|
68-pin SCSI connector - external |
J2 |
68-pin SCSI connector - internal |
J4 |
|
TERMINATION CONFIGURATION | ||||
|
Internal Devices |
External Devices |
RN1 |
RN2 |
RN3 |
|
Wide |
Wide |
Removed |
Removed |
Removed |
|
None |
Wide |
Installed |
Installed |
Installed |
|
Wide |
None |
Installed |
Installed |
Installed |
|
Narrow |
None |
Installed |
Installed |
Installed |
|
None |
Narrow |
Installed |
Installed |
Installed |
|
Narrow |
Wide |
Removed |
Removed |
Installed |
|
Wide |
Narrow |
Removed |
Removed |
Installed |
|
Narrow |
Narrow |
Removed |
Removed |
Installed |
|
MISCELLANEOUS TECHNICAL NOTES |
|
Only two SCSI connectors (J1&J2, J2&J3 or J3&J1) can be used simultaneously. All three SCSI connectors cannot be used at one time. |