ASUS COMPUTER INTERNATIONAL
PCI-DA2100
|
Card Type |
Hard drive controller |
|
Processor |
486DX2 |
|
Maximum On Board Memory |
32MB (EDO supported) |
|
Hard Drives Supported |
Up to 14 SCSI-2 Fast Wide devices |
|
Floppy Drives Supported |
None |
|
Data Bus |
32-bit PCI |
|
Card Size |
Half length, full height |
|
Raid Levels Supported |
0,1,3,5 |
|
CONNECTIONS | |||
|
Function |
Location |
Function |
Location |
|
68-pin SCSI-2 Fast Wide connector channel 0 - external |
CN1 |
68-pin SCSI-2 Fast Wide connector channel 1 - internal |
CN3 |
|
68-pin SCSI-2 Fast Wide connector channel 0 - internal |
CN2 |
4-pin connector - drive active LED |
JP6 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
|
Factory configured - do not alter |
JP1 |
Open | |
|
Factory configured - do not alter |
JP2 |
Open | |
|
DRAM CONFIGURATION | |
|
Size |
Bank 0 |
|
2MB |
(1) 512K x 36 |
|
4MB |
(1) 1M x 36 |
|
8MB |
(1) 2M x 36 |
|
16MB |
(1) 4M x 36 |
|
32MB |
(1) 8M x 36 |
|
Note:DRAM with or without parity is accepted but with parity is recommended. EDO supported. Minimum of 2MB is required, but 4MB is suggested for RAID 3 and 5. | |