ADAPTEC, INC.
AMM-1525M
|
Card Type |
Hard drive controller/Sound card |
|
Hard Drives supported |
Two IDE/ATAPI drives Up to 7 SCSI devices |
|
Floppy drives supported |
None |
|
Data Bus |
16-bit ISA |
|
Card Size |
Three-quarter length, full-height |
|
CONNECTIONS | |||
|
Function |
Location |
Function |
Location |
|
40-pin primary IDE/ATAPI connector |
CN1 |
Line in |
CN5 |
|
50-pin SCSI connector - internal |
CN2 |
Line out |
CN6 |
|
16-pin game/MIDI port |
CN3 |
Headphones/speakers |
CN7 |
|
Microphone in |
CN4 |
CD audio in |
J3 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
|
IDE port address enabled |
J4/pins 1 & 2 |
Open | |
|
IDE port address disabled |
J4/pins 1 & 2 |
Closed | |
|
IDE is secondary in system at 170h port address |
J4/pins 3 & 4 |
Closed | |
|
IDE is primary in system at 1F0h port address |
J4/pins 3 & 4 |
Open | |
|
Sound chip base address is 220h |
J9 |
Pins 1 & 2 closed | |
|
Sound chip base address is 240h |
J9 |
Pins 2 & 3 closed | |
|
I/O port address is 340h |
J10/E |
Open | |
|
I/O port address is 140h |
J10/E |
Closed | |
|
SCSI INTERRUPT SELECTION | |||||
|
IRQ |
J10/A |
J10/B |
J10/C |
J10/D | |
|
IRQ9 |
Open |
Open |
Open |
Closed | |
|
IRQ10 |
Open |
Open |
Closed |
Open | |
|
IRQ11 |
Open |
Closed |
Open |
Open | |
|
IRQ12 |
Closed |
Open |
Open |
Open | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
SCSI termination on the controller is always enabled and cannot be changed since the controller is always at one end of the SCSI bus. |