ADAPTEC, INC.
AVA-2825
|
Hard Drives supported |
Two IDE (AT) drives Up to 7 Fast SCSI-2 devices |
|
Floppy drives supported |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
Data Bus |
32-bit VESA Local Bus |
|
Card Size |
Three-quarter length, full-height |
|
CONNECTIONS | |||
|
Function |
Location |
Function |
Location |
|
4-pin connector - drive active LED |
J1 |
50-pin SCSI connector - internal |
J4 |
|
40-pin IDE(AT) connector |
J2 |
50-pin SCSI connector - external |
J5 |
|
34-pin cable connector - floppy drive |
J3 | ||
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
|
SCSI I/O base address is 340h-35Fh |
J7 |
Pins 1 & 2 closed | |
|
SCSI I/O base address is 140h-15Fh |
J7 |
Pins 2 & 3 closed | |
|
Floppy drive interface enabled |
SW1/1 |
On | |
|
Floppy drive interface disabled |
SW1/1 |
Off | |
|
IDE(AT) interface enabled |
SW1/2 |
Off | |
|
IDE(AT) interface disabled |
SW1/2 |
On | |
|
BIOS ADDRESS SELECTION | |||
|
Address |
SW1/3 |
SW1/4 | |
|
C8000h |
Off |
Off | |
|
CC000h |
Off |
On | |
|
D8000h |
On |
Off | |
|
DC000h |
On |
On | |