ACCULOGIC, INC.
SIDE-2/PCI
| |
Data bus: |
32-bit PCI |
Size: |
Half-length, half-height card |
Hard drive supported: |
Four IDE(AT) drives |
Floppy drives supported: |
None |
CONNECTIONS | |
Function |
Location |
40-pin primary IDE(AT) connector |
J1 |
2-pin connector - drive active LED |
J2 |
40-pin secondary IDE(AT) connector |
J3 |
10-pin ISA IRQ board connector |
J5 |
USER CONFIGURABLE SETTINGS | |||
Function |
Location |
Setting | |
Factory configured - do not alter |
J4 |
N/A |
ADDRESS MODE SELECTION | |||
Mode |
W2/A |
W2/B | |
ISA IDE |
Off |
On | |
Native mode |
On |
Off |
PCI PRIMARY INTERRUPT SELECTION | |||||
INT |
W3/A |
W3/B |
W3/C |
W3/D | |
ISA IRQ 14 |
Off |
Off |
Off |
Off | |
A |
On |
Off |
Off |
Off | |
B |
Off |
On |
Off |
Off | |
C |
Off |
Off |
On |
Off | |
D |
Off |
Off |
Off |
On |
PCI SECONDARY INTERRUPT SELECTION | |||||
INT |
W4/A |
W4/B |
W4/C |
W4/D | |
ISA IRQ 15 |
Off |
Off |
Off |
Off | |
A |
On |
Off |
Off |
Off | |
B |
Off |
On |
Off |
Off | |
C |
Off |
Off |
On |
Off | |
D |
Off |
Off |
Off |
On |
MISCELLANEOUS TECHNICAL NOTES |
If IRQ 14 or 15 is selected, the ISA IRQ board is required. This board connects the primary IDE interrupt to the ISA bus IRQ 14 and secondary IDE interrupt to ISA bus IRQ 15. |