ADLIN ENGINEERING
MAYTRONICS MODEL 891010
|
|
Data bus: 16-bit, ISA
Size: Half-length, full-height card
Hard drives supported: Two IDE Interface (AT) drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB drives
|
CONNECTIONS | |
|
40-pin IDE Interface (AT) connector |
CN1 |
|
34-pin data cable connector-floppy drives |
CN2 |
|
4-pin connector-drive active LED |
CN3 |
|
5-pin connector-DC power |
CN4 |
|
USER CONFIGURABLE JUMPERS | |||
|
Function |
Location |
Setting | |
|
Floppy drive port address is 3F0-3F7h |
JP1 |
pins 1 & 2 closed | |
|
Floppy drive port address is 370-377h |
JP1 |
pins 2 & 3 closed | |
|
Hard drive port address is 1F0-1F7h |
JP2 |
pins 1 & 2 closed | |
|
Hard drive port address is 170-177h |
JP2 |
pins 2 & 3 closed | |
|
Hard drive enabled |
JP3 |
pins 2 & 3 closed | |
|
Hard drive disabled |
JP3 |
pins 1 & 2 closed | |
|
I/O Channel Ready output on Interface pin 27 |
JP4 |
pins 1 & 2 closed | |
|
I/O Channel Ready output on Interface pin 21 |
JP4 |
pins 2 & 3 closed | |
|
IRQ14 connected to bus |
JP5 |
pins 1 & 2 closed | |
|
IRQ14 is buffered |
JP5 |
pins 2 & 3 closed | |