IPTool.net.ua IPTools.net.ua

WS-1414EV1

WISECOM, INC.

WS-1414EV1

Card Type

Modem (asynchronous)

Chipset

Cirrus Logic

Maximum Data Rate

14.4Kbps

Maximum Fax Rate

14.4Kbps

I/O Options

Voice

Data Bus

Serial

Fax Class

Class I

Data Modulation

Bell 103A/212A

ITU-T V.21, V.22, V.22bis, V.32, V.32bis

Fax Modulation

ITU-T V.17, V.21CH2, V.27ter, V.29

Error Correction/Compression

MNP5, V.42, V.42bis

CONNECTIONS

Function

Label

Function

Label

Line in

CN1

RS-232/422

CN3

Line out

CN2

DC power in

CN4

DIAGNOSTIC LED(S)

LED

Color

Status

Condition

MR

Red

On

Power is on

MR

Red

Off

Power is off

TR

Red

On

DTR signal is high

TR

Red

Off

DTR signal is low

SD

Red

On

Modem is transmitting data

SD

Red

Off

Modem is not transmitting data

RD

Red

On

Modem is receiving data

RD

Red

Off

Modem is not receiving data

OH

Red

On

Modem is off-hook

OH

Red

Off

Modem is on-hook

CD

Red

On

Carrier signal detected

CD

Red

Off

Carrier signal not detected

DIAGNOSTIC LED(S) (CONT)

LED

Color

Status

Condition

AA

Red

On

Auto-answer enabled

AA

Red

Off

Auto-answer disabled

EC

Red

On

Error correction enabled

EC

Red

Off

Error correction disabled

SUPPORTED STANDARD COMMANDS

Basic AT Commands

+++, comma, A/

A, B, D, E, H, L, M, N, O, P, Q, T, V, X, Y, Z

&C, &D, &F, &G, &P, &S, &T, &V, &W, &Y, &Z

Extended AT Commands

\A, \B, \C, \G, \J, \K, \N, \O, \Q, \T, \U, \X, \Y, \Z

%A, %C, %E, %G

Special AT Commands

-C, "H, -J, "O

S-Registers

S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S12, S11, S14, S16, S18, S21, S22, S23, S25, S26

S27, S30, S90, S108, S109

Note: See MHI documentation for complete information.

UNIDENTIFIED COMMANDS

Command

Default

S37

0

Proprietary AT Command Set

DISPLAY INFORMATION

Type:

Immediate

Format:

AT [cmds] In [cmds]

Description:

Displays information requested about the modem.

Command

Function

I0

Reports product identification code.

I1

Reports firmware revision.

I2

Tests and reports ROM checksum.

I3

Reports device ID.

TRELLIS CODING

Type:

Configuration

Format:

AT [cmds] &Un [cmds]

Description:

Selects whether the modem will use trellis coding.

Command

Function

í &U0

Trellis coding enabled.

&U1

Trellis coding disabled.

EXTENDED RESULT CODES

Type:

Configuration

Format:

AT [cmds] \Vn [cmds]

Description:

Selects what form of result codes will be issued.

Command

Function

\V0

Extended result codes disabled.

\V1

/REL added to reliable mode connections.

í \V2

Error correction protocol result codes enabled.