GARRETT COMMUNICATIONS
MAGNUM FT1/FT1A/FT10
Card Type |
Ethernet Transceiver |
NIC Type |
Ethernet |
Maximum Onboard Memory |
Unidentified |
Boot ROM |
Not available |
Network Transfer Rate |
10Mbps |
Topology |
Linear Bus, Star |
Wiring Type |
AUI transceiver via DB-15 port, Fiber optic |
Data Bus |
External |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
AUI transceiver port |
CN1 |
ST transmit fiber connector |
CN3 |
ST receive fiber connector |
CN2 |
USER CONFIGURABLE SETTINGS | |||
Function |
Label |
Position | |
SQE disabled |
SW1 |
Off | |
SQE enabled |
SW1 |
On |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
LED1 |
Unidentified |
On |
Power is on & network connection is good |
LED1 |
Unidentified |
Off |
Power is off & network connection is broken |
LED2 |
Unidentified |
On |
Collision detected on network |
LED2 |
Unidentified |
Off |
No collision detected on network |
LED3 |
Unidentified |
Blinking |
Data is being transmitted |
LED3 |
Unidentified |
Off |
Data is not being transmitted |
LED4 |
Unidentified |
On |
Jabber condition detected |
LED4 |
Unidentified |
Off |
No jabber condition detected |
LED5 |
Unidentified |
Blinking |
Data is being received |
LED5 |
Unidentified |
Off |
Data is not being received |
LED6 |
Unidentified |
On |
Power is reaching the unit |
LED6 |
Unidentified |
Off |
Power is not reaching the unit |
LED7 |
Unidentified |
On |
SQE is enabled |
LED7 |
Unidentified |
Off |
SQE is disabled |
MISCELLANEOUS TECHNICAL NOTES |
The FT1 and the FT1A use multi-mode fiber optic cable and the FT10 uses single-mode. |